Martinez Albainox Thrower Knife Matt 3Cr13Mov (32521)
- Thrower Knife Matt 3Cr13MoV - compact throwing knife with full tang construction in matte finished 3Cr13MoV steel. Sheath made of ABS plastic with belt clip included.
10,10 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
The Martinez Albainox Thrower Knife Matt is a minimalist training tool with a raw, technical feel. It was designed for beginners to throwing knives and users who appreciate simplicity and functionality in their daily EDC gear. Made from a single piece of 3Cr13MoV steel, it offers sturdiness, ease of maintenance and high resistance to weather and mechanical wear. The knife's lack of grips, symmetrical design and smooth surface make it sit well in the hand and allow for quick, repeatable throws. The matte finish gives the overall design a discreet, utilitarian look, while increasing resistance to micro-damage. An integrated mini saw will help cut fibrous materials or hard plastics. Thanks to its full tang construction , the knife remains stable even under heavy use - both on the throwing track and in emergency situations in the field. It comes with an ABS plastic sheath with a clip for comfortable carrying at the belt or attaching to tactical gear. The 32521 is a practical solution for those seeking a balanced compromise between durability, simplicity and performance.
3Cr13MoV is a martensitic chromium steel that has been enriched with molybdenum (Mo) and vanadium (V) to improve its performance properties. The typical chemical composition includes about 0.26-0.35% carbon (C), 12.5-14.5% chromium (Cr), 0.4-0.6% molybdenum (Mo) and 0.1-0.2% vanadium (V). The addition of chromium provides corrosion resistance, while molybdenum increases hardenability, high-temperature strength and resistance to pitting corrosion. Vanadium contributes to the hardness, wear resistance and fine grain structure of the steel. 3Cr13MoV is used for knives (often found in folding knives and hunting knives), medical tools and other applications where a good combination of corrosion resistance, hardness and strength is required. It is an improved version of 3Cr13 steel, offering better sharpness retention and overall durability
Blade - symmetrical spear point profile provides even weight distribution and predictable trajectory - features important for beginners and intermediate users. The blade is made of 3Cr13MoV stainless steel, combining corrosion resistance with ease of sharpening. The matte finish reduces light reflections and increases the resistance of the surface to scratches from intense contact with the target. The integrated mini saw will help in cutting fibrous materials or hard plastics. The design has been stripped of unnecessary details, which promotes intuitive handling and minimizes points prone to damage. Blade and Handle form a single, compact unit - a solution typical of professional training tools, where durability and efficiency count.
Handle - is an integral part of the monolithic structure, which increases rigidity and eliminates the risk of damage from loose parts. The smooth surface promotes smoothness of the grip, and the symmetrical form allows flexible adaptation to different throwing styles. The overall design is built for durability and easy handling in dynamic conditions. A ABS plastic sheath equipped with a belt clip is included for easy transport and quick access to the knife in the field or during training.
Technical data:
Product number: 32521
Name: Thrower Knife Matt
Overall length: 175.0 mm / 6.89 "
Blade length: n.d.
Blade thickness: 2.5 mm / 0.1"
Handle length: n.d.
Handle thickness: n.d.
Weight: 78.5 g / 2.77 oz
Blade material: 3Cr13MoV
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Matt
Handle material: 3Cr13MoV
Handle finish color/finish color: Matt
Sheath (holster): ABS
Additional accessories: none
Designer: Martinez Albainox
Brand name: Martinez Albainox
Manufacturer: Martinez Albainox S.L.U., Spain
Country of origin: n.d.
Developed by: the Sharg® company
